Back to the build menu.Instructions for building a large size tire jump. This is the jump you will be building. Remember to hover the mouse over the pictures to enlarge them.
The Humans
Step 1: Cut the 1" PVC pipes into the required lengths (Note: Easiest to do with a ratcheting PVC pipe cutter less than $10 for a cheap one):
-
2 x 48" pieces for the uprights.
-
2 x 30" pieces for the top and bottom crossbars.
-
4 x 16" pieces for the feet.
Step 2: Assemble the pieces of PVC as seen in the picture into the frame.
Step 3: Form the drain tile into a circle using the chain to hold the ends together.
Step 4: Hang the tire (drain tile) from the top bar of the PVC frame with the chain.
Step 5: Use bungee cords on both sides of the tire to hold it to the sides of the frame.
| Part | Qty. | Ea. | Total |
|---|---|---|---|
| 1" x 10' PVC pipe | 2 | $2.60 | $5.20 |
| 1" 90 degree elbows | 2 | $0.46 | $0.92 |
| 1" PVC caps | 4 | $0.66 | $2.64 |
| 1" 4 way Tees (www.formufit.com) | 2 | $2.40 | $4.80 |
| Bungee cords | 2 | $1.50 | $3.00 |
| Drain tile feet | 6 | ||
| Chain 36" | 1 | $4.00 | $4.00 |
| Subtotal | $20.56 | ||
| Sales tax | $1.54 | ||
| Labor hrs. | 2 | $0.00 | $0.00 |
| Total | $22.10 |
Back to the build menu.